HUD RP-W4236 (Shaker White Only) RAISED PANEL Old American Wall Cabinets

FACE FRAME
Kiln dried solid wood.
Mortise and tenon, glued and power nailed
Rails 3/4? x 1 3/4? Styles 3/4? x 1 3/4?, Mullion 3/4? x 3 1/2
END PANELS
1/2? phenolic hardwood plywood
Ends to be rabbeted to receive tops, bottoms and shelves-glued and stapled into face frame
BACKS
1/4? thick regular hardwood plywood
Securely glued and stapled to ends
BASE BOTTOMS
1/2? thick regular hardwood plywood
Bottoms let into end panels and face frame
Back of floor set on supporting member, glued and fastened
WALL TOP/ BOTTOM
1/2? thick regular hardwood plywood.
Top/bottoms let into end panels and face frame, glued and fastened.
INSTALLATION CLEATS

Wall cabinets have a 3/4?x3 1/2? solid lumber running full length of cabinet at top and bottom
Base cabinets have a 7 1/2? cleat at the top and 3 1/2? cleat at the bottom.
DOOR AND DRAWER FACES

3/4? thick,Phenolic hardwood with no more than one veneered joint on face
Overlay type with edges reversed (reverse bevel) to form a continuous finger pull on all sides
Edges filled and sanded prior to finishing
FINISH

Consisting of stain from standard color selection, sealer and two top coats uv finish
SHELVING

3/4? phenolic hardwood plywood with front edge
For wall and base cabinets shelves are let into dadoes of end panels.
DRAWERS

Drawer fronts are same material as doors.
Sides, backs and fronts are 3/4? thick solid wood
Drawer constructed as a 4-sided drawer box with ends captured in the sides and the drawer front glued to the box and fastened.
Drawer bottoms are 1/4? hardwood exterior plywood let into sides, front & back components
TOE KICK

3/4?x 4 1/2? pressure treated solid wood
Toe kick is inset 3?
HARDWARE

Hinges: barrel antique brass fin. standard heavy duty semi-concealed, 1/2?overlay, wrap around, self closing.
Drawer slides are epoxy white metal, mounted on the side rails with plastic rear mount brackets having 75 lbs load capacity.
Bumper pads are white foam (or brown felt).Five Piece Painted HDF Door with Mortise and Tenon Frame featuring a 45? Inside Bevel & Flat Recessed Center Panel
?? Plywood Box with UV Coated Matching Exterior
Glue & Staple or Metal Clip Assembly
UV Coated Natural Interior